Star Trek , Tricorder Marco Pt, BRB Knobs, 3 Metal T-Jet, Marco Face Plate

Description

Star Trek, Marco Enterprises; Tricorder
Aluminum
Face-Plate Full Kit
: NO-SCREW-HOLES,
JUST A CLEAN FACE-PLATE KIT, AT LAST
!!
Kit Includes 11 pcs:
Blue-Red-Blue Guilloche Jewels, one Marco Enterprises Compatable 1/16 inch thick Face Plate Plate,
3 Metal T-Jet Hubs tapped and, three matching Hub Screws.
(NO PLASTIC HERE) BEST PRICE ON A COMPLETE RETROFIT FACE-PLATE PACKAGE !
Due to massive popular request, we now have available, custom made face-plates for the TOS  Marco Enterprises Tricorder kit. They are the
exact dimensions
of the face-plate provided with the Tricorder Kit. This is made of 1/16" ALUMINUM ALLOY WITH A FACTORY BRUSHED FINISH, giving the face-plate a great Set Accurate look to match the actual prop as seen in the TV series.
You can now purchase this face-plate as a kit containing: The face-plate, the coin edge watch crown Guilloche Jewels, the aluminum Knobs.
NO bright-anodized chrome like finish, and NO Nibble-Marks around the cut-outs and perimeter. This is a nice and clean face plate.
MOST OF ALL:
NO MORE front-mounting screw-holes!
This plate is available in
2 styles
;
as shown above with all-small-holes for guilloche watch crowns or,  listed separately in my store is a
large-hole plate
to accommodate the 5mm LEDS that Marco includes in his kits.
Tricorder
not part of sale
. Just the face-plate 11pc retrofit kit as described below...
The jewels do NOT light up, and can not be lit, BUT they look just like the Master Replica jewels when installed. These look FANTASTIC!
This Kit recalls the famed Dwyer
MoPop Tricorder
as fabricated by Wah Chang under the design direction of Matt Jefferies.
PRICE IS FOR ONE COMPLETE SET; TOTAL OF 10 (Ten) COMPONENTS !
INCLUDES CLEAN FACE-PLATE
!
If you
just want
metal T-Jet Sets (or some extras...);…
CLICK HERE TO JUMP TO ALUMINUM TRICORDER AND COMMUNICATOR KNOB SETS
Kit Ships at ONE shipping charge so,
kits are a GREAT value
!
New Guilloche Jewels: Set of Three;
3/16 inch nominal diameter, Blue-Red-Blue color Jewels set of three featuring coin edge bezels.
Suggested Jewel Installation:
Super glue. The underside of the jewel has a shoulder on it that will sit down into the hole and make it near impossible to accidentally knock-off.  Epoxy is an option too.
Metal T-Jet Knob Specs:
Set of Three with Three Screws;
Precision machined aluminum.
Engineering/Design informed by HMS Roddenberry style knobs as I have in archived Communicator and Tricorder kits
.
Overall prop accurate 1/4 inch nominal diameter x 1/8
inch
nominal height. Includes M2 x 6.5 mm (1/16
inch
dia. x 1/4
inch
long English; nominal) button head Phillips screw to accommodate this thicker .063 (1/16
inch
thick) Tricorder face plate! and, the Knob has integral boss on back-side that mounts to Tricorder Plate for that authentic museum look.
Very high grade. Look at listing images.
Face-Plate:
Apply further metal grain with a Scotch-Bright or 220 grit sandpaper. You are the prop builder.
Plate Detailed Dimensions:
Very precise to retrofit onto the Marco Tricorder.
Buy with confidence; Returns are accepted for 30 days !
METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as "Dawn" or "Palmolive" to insure a clean part.
Some Star Trek Prop History For Inquiring Minds:
Most of these Prop Makers and Technicians have passed-on.
Below are old-timer accounts of convention conversations before conventions were really a fad. (all 2nd hand stories)
The persons quoted worked for; Desilu, NBC, Paramount & Gene
Mr. Bob Stone
was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend
Robert Archer
(VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.
Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that  a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).
Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props.
Richard Heimer
made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and, urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage.
James Ruggs
(b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James.  Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James.
In closing a nod to
Mr. Ruck
, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart.